Maintenance
35
Replacement Parts
BDS Cal Cart Receiver Specifications
Description
Qty
Part Number
Cord, AC power
115 VAC
230 VAC Harmonized
1
1
5-1286
5A2416
Plug, 115 VAC
1
5A2626
Grommet
1
4421A372
Cordreel
1
4421A383
Casters
4
4421A384
Handle
1
4421A385
Calibrated Power Accuracy
< 1.1% @ 13.56 MHz, <2% Entire Range
Calibrated Power Level
1700 watts
Parameter
Specification
Frequency range
307 kHz - 100 MHz (sensor dependent)
Frequency resolution
100 Hz
Frequency accuracy
± 1 kHz
Frequency Tracking
For frequency-agile applications, the frequency must
be stable for at least 12.5 ms for 8-bit
measurements and 30 ms for 12-bit measurements in
order to receive valid data. During
frequency changes data drop-outs will occur.
Harmonics
10 maximum (in addition to the fundamental), up to
100 MHz, Sensor Dependent
Intermodulation Products
Up to 6 IMD frequencies per fundamental, 3 “minus”
and 3 “plus” (measurement dependent).
F1-3F2, F1-2F2, F1-F2
F1+3F2, F1+2F2, F1+F2
Number of fundamental
frequencies (F
0
)
Up to 3
Analog inputs
Two analog inputs (0 - 10 Vdc full-scale, 10k ohm
resistance). Can be assigned to any of the analog
outputs or used for set-point or power threshold
adjustment.
Analog outputs
Five individual outputs (0 - 10 Vdc full-scale, 1000
ohm source impedance representing voltage, current,
phase, impedance - with or without externally
supplied variables applied).
Digital outputs
Voltage, current, phase, frequency, impedance, and
power at frequencies selected by the user.
