2
3V
LITHIUM
CR2032
+
3V
LITHIUM
CR2032
+
i
OK?
3x
Designed in Switzerland / Made in EU
BBC Bircher Smart Access,
BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
3
Installation sequence, set-up
4
Pairing transmitter with receiver
Insert new batteries (take polarity into account)
Put on the cover
Open housing (screwdriver recommended)
Remove batteries
5
Maintenance
5.1 Warning indicator for low battery voltage
5.2 Battery change
Receiver: 3 beeps every minute
To find out which transmitter has low
battery voltage:
Press each edge. A beep indicates the low
battery.
Battery voltage low
Beep
6
Technical data
Transmitter
Battery power
2x Lithium 3 V Type CR2032
Power consumption
Transmitting: 17 mA standby: 16 µA
Frequency bands
869.525 MHz & 868.15 MHz
Optional
for external antenna
Connector SMA (f)
for antenna with SMA connector (m)
7
EU Declaration of Conformity
9
Contact
8
WEEE
See attachment
2.3 Cable routing, strain relief
Determine the cable routing
Break out the corresponding part of the cover if necessary
Punch hole into the grommet
Thread cable
Fix cable with the clamp (
➔
strain relief)
Cable Ø: 3.1 – 5.2 mm
… or use holes
in the base plate
Break out …
➔
See instruction manual of receiver.
➔
See instruction manual of receiver.
Hint:
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.
click
