Radarfield
a
b
ArtMotion 2
ArtMotion 2
3 m
–
+
– +
+
–
1m
2m
3m
1m
2m
0m
0m
1m
2m
3m
4m
2.2 m
b
90°
1m
2m
3m
1m
2m
0m
0m
1m
2m
3m
4m
2.2 m
1
a
Art
Motion 2
Connecting
Observe the national and international regulations on door safety.
Only trained, qualified personnel may mount and start up the detector.
The unit may only be opened and repaired by Bircher Reglomat.
The unit may only be operated from a safety extra-low voltage (SELV) system with safe electrical separation.
Always consider the safety functions of your application as a whole, never just in relation to one individual section of the system.
The installer is responsible for carrying out a risk assessment and installing the detector and the door system correctly.
Avoid touching any electronic components.
The door drive and transom profile must be earthed correctly.
Start-up
2
Montage
Original instructions
Recommended start-up sequence:
I. Mounting II. Connection
Mounting
I
General
Safety instructions
1
1.
Remove cover hood
2.
Lay and connect cable
3.
Mount detector
Microwave motion detector for opening
automatically controlled doors
1.
Position drill template
2.
Drill the holes, remove drill template
3.
Lay cable and mount detector
ENGLISH
Mounting of the detector
II
Electrical connections
3
Mechanical fine tuning
4
Wide radar field
min. = 0.8 x 1.6 m
max. = 2.3 x 4.8 m (WxD)
Inclination angle: 35°
Inclination angle: 35°
Radar field
a
Hood
b
Light window detector indication
Cable bushing
Mounting
Microwave module
LED microwave: green
Potentiometer
min. = 1.6 x 0.8 m
max. = 4.8 x 2.3 m (WxD)
turn
90°
Narrow radar field
351084A
12/15
Controller
Power
Supply
Radar
output
Radar
white
brown
white
green
Cable
yellow
brown
green
yellow
Manual settings of the
inclination
0° ... +45° in 5° steps
12–36 VDC
12–28 VAC
