5
Configuration by hand DIP-Switch and potentiometer
Radar functions
DESCRIPTION
Field size
1 = Smallest radar field (LED flashes once),
2 ......., 3* = Medium radar field (flashes 3 times),
4 ......, 5 = Largest radar field size (flashes 5 times)
Direction recognition
1
ON
2
3 4
ON = both directions
OFF* = forward
C
ross
T
raffic
O
ptimisation CTO
1
ON
2
3 4
ON = CTO on
OFF* = off
Door filter (Interfence for radar)
1
ON
2
3
4
ON = Door and interference filter on
(EM interference, e.g. fluorescence tube)
OFF* = filter off
Radar output
1
ON
2
4
3
ON = passive (NC)
OFF* = active (NO)
2
1
ON
2
3
4
Radar output (active/passive, NO/NC)
Interference filter (Door and EM interference)
CTO and swing filter
Direction recognition
green LED
Fault
Remedy
continuously
lit
Radar tripping when door is closing
1. Set angle of radar further away from the door.
2. Adjust radar field size.
Radar false tripping without
apparent external influence
1. Avoid light sources (e.g. fluorescent tubes) in the immediate vicinity of the detector.
2. No moving objects (plants, advertising posters, etc.) in the vicinity of the detector.
3. Avoid strong vibration at the radar detector
4. Possible influence from a second radar detector in the vicinity (very unlikely)
Identification of the year of manufacture
8.2
Smallest radar field
Largest radar field
medium radar field
Potentiometer
DIP-Switch
The Slow Motion Detection (SMD) is a factory setting. The SMD recognises slow motions after the detecor has been activated.
Year, month, day
Troubleshooting
6
Technical data
7
Technology
Double field module, 24.125 GHz
Mounting height
1.8 - 4 m
Electrical power supply
≤
120 mA @ 11.5 – 32 VDC, 12 – 28 VAC
Power consumption
< 4 watts
Making current
≤
800 mA
Radar output
Solid State Relay
max. contact voltage: 48V (AC) / 48V (DC), max. contact-resistance: 30 Ohm
max. load current: 80mA, max. switching capacity: 500mW (AC) / 500mW (DC)
Protection type
Suitable for use acc. to IP54
Operating temperature
-20° to 60° C
Dimensions
172 x 60 x 48 mm (LxWxD)
Weight
120 g
Declaration of conformity, identification of the year of manufacture by means of the serial number
8
9
Contact information
Manufacturer:
Bircher Reglomat AG
Wiesengasse 20
CH-8222 Beringen
www.bircher-reglomat.com
Declaration of conformity
8.1
Manufacturer:
Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen
Following directives have been observed:
RoHS 2011/65/EU, RED 2014/53/EU, EMC 2014/30/EU
Product variant:
PrimeMotion B
* factory settings
Danish seller:
Swissdoor ApS
Stenhuggervej 2
DK-5471 Søndersø
www.swissdoor.dk