Birch Carisma N2800, Руководство пользователя

Страница: 31 / 38

9
select 31H means display the message saved on layer 1.
select 32H means display the message saved on layer 2.
select 33H means display the message saved on layer 1+ layer2.
select 34H means display the message saved on layer 3.
select 35H means display the two messages saved on layer 1 + layer 3.
select 36H means display the two messages saved on layer 2 +layer 3.
select 37H means display all the messages saved on layer 1 +layer 2 + layer 3.
d) For display modes,
select 31H means display the message with Mode 1.
select 32H means display the message with Mode 2.
select 33H means display the message with Mode 1+Mode 2.
For this Demo display function, you must have saved the message by COMMAND "S" previously, For example, select
37H for displaying layers and select 33H for displaying modes, DSP would display all the three messages saved on
layer 1+ layer 2 + layer 3 with both Mode 1 + Mode 2 displaying modes.
e) Any new message from the computer would stop this Demo
display function and DSP would display that new message from the computer.
G. Select the Command Mode
COMMAND: M
COMPUTER: EOT SOH 'M' 'Mode' ETB
ASCII (04H) (01H) (4DH)(30H~38H) (17H)
Byte 1 1 1 1 1
DISPLAY: ACK (or NACK if failed)
ASCII (06H) (15H)
Byte 1 1
Note:
Command Modes Selection
H. Set all default
COMMAND: X
COMPUTER: EOT SOH 'X' ETB
ASCII (04H) (01H) (58H) (17H)
Byte 1 1 1 1