Birch BP-002BF, Руководство пользователя

Страница: 20 / 54

BP-002 User's Manual
- 15 -
2.8.1 Connect to the Printer, Run the WiFiConfig Software
Connect the printer and the computer with the USB interface cable, make sure the printer is in normal
working condition, and then turn on both the printer and the computer, double click WiFiConfig.exe in
the driver CD. The software interface is as follows:
Explanation Table
Item Explanation Note
Select a printer Select the printer model in the list.
Refresh Refresh the printer model.
Enter setup mode
Enter setup mode.
Note: If the printer has entered setup mode, please don’t click “Enter
setup mode” again.
Load Load the current Wi-Fi parameter.
Baudrate
Set the serial baudrate. This parameter setting usually does not need to
change.
Flow control
Control the flow of communication data. There is no need to change this
parameter normally.
WLAN type
Select the WLAN type Infrastructure, Ad Hoc or OFF.
Infrastructure: Select infra, through router to connect network;
Ad Hoc: Select ad-hoc, wireless network card can communicate with
printer directly;
OFF: Select the printer Wi-Fi interface off.
Caution: Wi-Fi interface transfers data through wireless network. The wireless signal may be
affected by the surrounding environment, please ensure the signal around printer
location is well enough.