9
3.5
CONNECTING THE FERRITES
The unit is supplied with two clip type ferrites; these are not optional items and must be
fitted.
If the ferrites are not fitted, the sensor could be affected by external electromagnetic noise.
The ferrites supplied with the unit should be clipped over the power and the signal leads,
between the gland and the connector blocks. Ferrites are not required on the relay
connections or on the hood heater supplies.
This sensor
MUST HAVE FERRITES INSTALLED.
Failure to install the supplied ferrite
cores may result in inaccurate readings or lost communications
Figure 5: location of the ferrites when installed
