biozoom VITALITY CHECK MSRRS SCN05, Руководство пользователя

Страница: 14 / 23

biozoom copyright© 2021
14
Figure 9
When you have selected the antioxidant FULL measurement (see second image in
Figure 6 ) you must
make four measurements in succession ( Figure 10 ). This greatly reduces the chances of measurement
errors, as measurements where the contact between your skin and the scanner was not ideal, can be
eliminated. It also means, that you must perform the same procedure four times before you get the final
result.
Figure 10
The app offers two modes to do the four measurement steps.
In the standard mode, the data of each individual measurement is evaluated directly after the
measurement. This mode is recommended for new users, because it enables the assessment of the hand
placement on the scanner for each measurement directly after the measurement is done. In many
situations the server will notice if you have not placed the hand on the sensor properly and you will get a
message with recommendations. Following these recommendations carefully will give you more precise
results and give you a better insight on your nutrition (
Figure 10 ). Based on this information the user can
improve his handling of the measurement process step by step.
After some time, users typically have enough experience and have learned the perfect use of the scanner.
This is the ideal time to change the modes. This can be done in the settings menu under “Wifi query”
(Press on the three- bar symbol in the upper left corner of the app and select “Settings” and then select
“WIFI query”. Then press the button “DEACTIVATE” , Figure 11 ).
Vorhandenes WIFI
Server
Cellular 4G/LTE
Alternative Data Exchange
0,7/4
Messungen
sind vollendet
Um die
Messung zu
wiederholen
„Nochmal
Versuche“
drücken