BIOTRONIK Renamic, Краткое руководство пользователя

Страница: 14 / 16

( Inl
et >< binding )
Proceed as follows if the connection quality is impaired:
• Change the position of the programmer or its orientation to the implanted device by slightly rotating or
moving it. When you do this, consider the delay in the field strength display (1) and observe the
preferred direction for SafeSync RF telemetry (2).
• Ensure that no objects or persons are located in the path between Renamic and the implanted device.
• Position Renamic as far away as possible from other electrical devices.
• Do not place the device to be implanted directly on metal surfaces, as the effectiveness of the antenna
is significantly reduced in the vicinity of electrically conductive surfaces.
RF Telemetry
Preferred directions (2) for SafeSync RF telemetry
(2)
(2)
Place Renamic in the ideal position for SafeSync RF telemetry
Various factors can impair the quality of the SafeSync RF telemetry connection. The current connection quality (1) is displayed in the programmer’s status bar.
This display can be used to determine the optimum position. In doing so, take the delay in the field strength display (1) into consideration.
1