Biotek Synergy LX, Руководство пользователя

Страница: 79 / 198

55 | Chapter 4 : Periodic Maintenance
Clean Exposed Surfaces
This procedure is for the housing of the Synergy LX instrument. See Clean the
Touchscreen on page 55 for the cleaning procedure for the touchscreen.
A regular cleaning regimen is recommended to keep the instrument free from dust and
particulates that can cause erroneous readings. Exposed surfaces may be cleaned (not
decontaminated) with a cloth moistened (not soaked) with water or water and a mild
detergent.
1. Turn off and unplug the instrument from the power supply.
2. Wet a clean cotton cloth with water or with water and mild detergent, then thoroughly
wring out the cloth so that liquid does not drip from it.
3. Wipe the plate carrier, the inside of the plate carrier door and front access door, and all
exposed surfaces of the instrument.
4. If detergent was used, wipe all surfaces with a cloth moistened with water.
5. Use a clean, dry, lint-free cloth to dry all wet surfaces.
If liquid is spilled inside the reader, call Technical Support.
Clean the Touchscreen
For models with the touchscreen only.
Important! Never spray solutions directly on the touchscreen.
Materials
Use the following products to safely clean the touchscreen:
l
Deionized or distilled water
l
Dish soap or other mild cleaner
l
Lint-free disposable towels
Synergy LX User Manual
1501000N Revision A BioTek Instruments, Inc.