Biotek MultiFlo FX Скачать руководство пользователя страница 125

Страница: 125 / 330

Protocol Parameters Tables | 103

file, if desired.

Plate Type

New protocols

: If needed, touch the plate type field to select a

different plate type.

Editing protocols

: Press the

Info

button and touch the

Plate

Type

field to change the plate type.

Add

Edit

steps:

New protocols

Add

a step to the

protocol (touch the Add button), select
a step and define its parameters.

Editing protocols

: Highlight a step

and press

Edit

to modify its

parameters.

Adding steps

: Highlight the

<end of

steps>

or a step to be preceded by the

new step, and press

Add

and the action

button to insert a step.

Copy

a similar protocol and then edit it to meet different requirements or to test

different parameters.

When editing a protocol, cut and paste steps to move them to the correct position.

6. Continue adding or editing steps, as needed.

7. Press

Save

to save the protocol. All saved protocols are put on the

Home screen for easy retrieval.

Optionally, do a test run to verify the protocol performs as
expected. Test Run executes the protocol. Fill vessels with
water or disconnect them if you want to preserve reagent.

Especially when creating complex BioStack protocols, use the
Validate button to check the order of the protocol steps.

Protocol Parameters Tables

For Wash step parameters see

Wash Parameters Table on page 108

Peri-pump Parameters

BioTek Instruments, Inc.

Содержание MultiFlo FX











































































































































































































































































































































Результаты поиска

Содержание MultiFlo FX

Отзывы:

Biotek MultiFlo FX, Руководство оператора, Страница: 125 / 330

Результаты поиска

Содержание MultiFlo FX

Отзывы: