Water to be Added into the Inner Container
The water in the Inner Container is for hydrogen enrichment and drinking. The water quality
must meet your local drinking water standards. Poor quality water may have negative effects
on your health and the product.
Local water conditions may require treatment of water to inhibit scale formation,
sediments and to remove chlorine, odor and taste. Please check with your local water
treatment services for recommendations. No Warranty on damage as a result of this
unit requiring cleaning due to hard or poor water quality.
Do not pour anything other than water into the product.
When using mineral or alkaline ionized water or hard water (> 180ppm CaCO
3
):
When mineral water, alkaline ionized water or hard water is used, after heating, a
floating residue or a milky white substance may form on the surface of the Inner
Container. This is due to the minerals in the water and is harmless to your health.
Frequent cleaning is recommended.
10
To clean the product before using for the first time, please
refer to “Cleaning and Maintenance” on pg.24.
Filtered and / or Purified Water is
Recommended
Do not use local tap water,
which is unfiltered.
Standard Preparation Procedures
1
Place the product upright on a flat surface
The product should be located on a flat, level surface for operation.
Содержание EOS7150-H
Страница 30: ...MEMO ...
Страница 31: ...MEMO ...
Страница 32: ...Biotek Environmental Science Ltd www besgroups com Rev A202008_EN_BES ...