Biotage TurboVap 96 Dual, Руководство пользователя

Страница: 13 / 26

13
Evaporate
Manual Mode
Figure 20 displays the Manual mode view. The display shows
that the left side is idle (the orange
Start button is active) and
the right side is running an evaporation (the blue Pause button
and the red Stop button are active).
To perform a Manual mode run, enter desired evaporation
parameters (gas flow, gas temperature, plate temperature,
and plate height). To initiate the run, press the
Start
button.
To terminate the run, press the Stop button. To pause the run,
press the Pause button.
1 Gas flow The current and set gas flow
2 Gas temperature The current and set gas temperature
3 Plate temperature The current and set plate temperature
4 Plate height The current and set plate height. Press to
move the plate up or down.
5 Start Press to start the evaporation
6 Pause Press to pause the evaporation
7 Stop Press to stop the evaporation
Figure 20. The Manual Mode View. In this figure the manifold settings are
synchronized.
Time Mode
Figure 21 displays the Time mode view. The display shows that
the left side is ready to start (the orange
Start button is active)
and the right side is running an evaporation (the blue Pause
button and the red Stop button are active).
To perform a Time mode run, enter desired evaporation
parameters, including time. To start the run, press the
Start
button. The progress bar displays the remaining and elapsed
time for the current evaporation. To change a setting, see
"Change a Setting in Manual or Time Mode" on page 14.
To terminate the run before it reaches the set end time, press
Stop
. To pause the run, press
Pause
. The pause will temporarily
turn off the gas flow.
1 Gas flow The current and set gas flow
2 Gas temperature The current and set gas temperature
3 Plate temperature The current and set plate temperature
4 Plate height The current and set plate height. Press to
move the plate up or down.
5 Time The set evaporation time in minutes
6 Start Press to start the evaporation
7 Elapsed/
Remaining time
The progress bar shows remaining and
elapsed time of the current evaporation.
8 Pause Press to pause the evaporation
9 Stop Press to stop the evaporation
Figure 21. The Time Mode View. In this figure the manifold settings are
synchronized.