BioSure PROFESSIONAL EOS7190-P, Руководство пользователя, Страница: 12 / 20

operate. If the unit senses a person's movement during operation, the red indicator on the panel
will change from steady light on to slow flashing, the unit stops running, and the STANDBY
indicator turns on. To start again, press the TIMER key.
Boost is a more powerful mode for use only when no person(s) is present.
BOOST Mode
1. Press the TIMER key to start the unit, use the TIMER key to select the running time:
2 / 12 / or 24 hours continuous operation.
2.
Press and hold the LEVEL button for at least 3 seconds to activate the Boost mode.
3. The device emits 3 beeps, the BOOST indicator will light up and start to run in the Boost mode.
※ You can press the LEVEL button again to return to the comfort mode.
The unit will configure the air volume according to the time setting first,
and user can change it later.
6.HOW TO USE
Be sure to use the mode without anyone around.
FAN SPEED
After selecting the running time, the unit
will automatically configure the air volume.
User can adjust it by FAN SPEED key. Check
the table on the right for reference.
WATER
LOW
ON
REFILL
TANK
REPLACE
FILTER
REPLACE
CELL
SERVICE
STANDBY
24 Hr
12 Hr
2 Hr
HIGH
MID
LOW
BOOST
COMFORT REFILLING
SMART SENSOR
TIMER FAN SPEED LEVEL HUMIDIFIER GENERATOR
Be sure to confirm that there is no one in the room, and choose the operating time
carefully to prevent someone from entering by mistake.
SMART SENSOR
LEVEL
FAN SPEED
Beep x3
TIMER
Beep
Press again TIMER
button
Turn off the SMART SENSOR
Restart the system
4.
If you choose the Boost mode, for safety reasons, the device will beep every 10 minutes.
This warning sound cannot be cancelled.
※ Switch the setting during system operation, the running time will be recalculated.
※ When the system is in standby (the ozone function is not running), the SMART SENSOR function sleeps.
※By default, the SMART SENSOR function in Comfort mode
is turned off and turned on in Boost mode.
5. The unit produces ozone in the first half of each cycle during operation, and air circulation in the second half.
When the time expires, the ozone concentration will fall within the safety standard.
At the end of the operation time, the ozone concentration will drop to the safe allowable range, but if you feel a strong
ozone smell when you enter the room, please open the window for ventilation.
m
Air Volume
(FAN SPEED)
150
100
50
ft
1600
1060
530 S
M
L
When you activate the Boost mode, please leave the room immediately.For safety reasons, the smart sensor will be
triggered and stop the unit automatically if you enter the room. To restart, press the TIMER key.
Beep x3
LEVEL
3 sec.
Beep
Press and hold the FAN
SPEED and LEVEL buttons
for 3 sec.. The SMART
SENSOR is turned off when
you hear three beeps.The
SMART SENSOR indicator
goes out in the mean time.
11
2 2
Space Area
*The max area of recommendation
Person(s) sensing function (SMART SENSOR) will be activated 5 minutes after the device starts to