Biostar X470NH, Руководство пользователя

Страница: 10 / 64

10 | Chapter 2: Hardware installation
<TypeB>
Step 1: Remove the heatsink and fan assembly bracket on the motherboard and keep the
cooler backplane under the motherboard.
Step 2: Place the heatsink and fan assembly on top of the installed CPU and make sure that the
fan cable is closest to the CPU fan connector. Please refer diagram to the following screw into
the screw hole in the order shown.
Note
»
Do not forget to connect the CPU fan connector.
»
For proper installation, please kindly refer to the installation manual of your CPU heatsink.
»
AMD Wraith Stealth CPU cooler only compatible with DDR4 modules without heatsink (The depth of
memory within 45-70mm can be installed, but it may touch the cooler.)
»
AMD Wraith Spire CPU cooler compatible with most DDR4 modules with heastink (86mm)
»
AMD Wraith Max CPU cooler only compatible with DDR4 modules without heatsink (The depth of
memory within 45-70mm can be installed, but it may touch the cooler.)