BIOS Setup
- 20 -
Parallel Port Mode
The default value is SPP.
The Choices:
SPP
(default)
Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel
Port.
ECP
Using Parallel port as Extended Capabilities
Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The Choices: EPP 1.7
(default), EPP1.9.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices:
3
(default), 1.
Game Port Address
Game Port I/O Address.
The Choices: 201
(default),
209, Disabled.
Midi Port Address
Midi Port Base I/O Address.
The Choices: 330
(default),300, 290
,
Disabled.
Midi Port IRQ
This determines the IRQ in which the Midi Port can use.
The Choices:
5,
10
(default).
Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI Slot or an AGP Slot.
The Choices: PCI Slot
(default), AGP.
OnChip USB Controller
This option should be enabled if your system has a USB installed on the system
board. You will need to disable this feature if you add a higher performance
controller.
The Choices: All Enabled
(default), All Disabled, 1&2 USB Port, 2&3 USB Port,
1&3 USB Port, 1 USB Port, 2 USB Port, 3 USB Port.
