TPower X58/TPower X58A
29
B. Memory Integration Test (M.I.T.)
This function is under “Overclocking Navigator Engine” item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is “Disabled”; the condition parameter should
be changed to “Enable” to proceed this test.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Chipset
O.N.E
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
Enter
F1
F10
ESC
=========== Automate OverClock System ===========
============ Manual OverClock System ============
Auto OverClock System [V6-Tech Engine]
DRAM Timing Configuration
Clock Gen Configuration
Current QPI Frequency :
Current Memory Frequency :
Current Uncore Frequency :
Intel(R) SpeedStep(tm) tech [Enabled]
Ratio CMOS Setting [24]
CPU Frequency Setting [133]
QPI Links Speed [Full-Speed]
QPI Frequency [4.800GT]
Uncore Frequency [Auto]
DRAM Frequency [Auto]
Command Rate [Auto]
> Intel PPM/Turbo Mode Configuraiton
>
>
> Voltage Control
Memory Test [Disabled]
Exit
Options
Disabled
Enabled
↓
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Chipset
O.N.E
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
Enter
F1
F10
ESC
=========== Automate OverClock System ===========
============ Manual OverClock System ============
Auto OverClock System [V6-Tech Engine]
Current QPI Frequency :
Current Memory Frequency :
Current Uncore Frequency :
Intel(R) SpeedStep(tm) tech [Enabled]
Ratio CMOS Setting [24]
CPU Frequency Setting [133]
QPI Links Speed [Full-Speed]
QPI Frequency [4.800GT]
Uncore Frequency [Auto]
DRAM Frequency [Auto]
Command Rate [Auto]
> Intel PPM/Turbo Mode Configuraiton
>
>
> Voltage Control
DRAM Timing Configuration
Clock Gen Configuration
Memory Test [Enabled]
Exit
Options
Disabled
Enabled
Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from “Enable” to “Disable”
to complete the test.
