Biostar TFORCE4 AM2, Руководство пользователя

Страница: 20 / 65

Motherboard Manual
18
Header for Memory Voltage Overclocking: JDDRII_2.3V
When processing Memory Voltage Overclocking, please place the jumper to
pin1-2 Closed. The Default setting is Pin 2-3 Closed.
1 3
Pin 1-2 Close:
Memory voltage 2.3V.
1 3
1 3
Pin 2-3 Close:
Normal status (default).
Note:
1.
When “JDDRII_2.3V” jumper cap is placed on Pin 2-3, memory voltage
can be manually adjusted under CMOS setup.
2. When “JDDRII_2.3V” jumper cap is placed on Pin 1-2, memory voltage
will be fixed at 2.3V automatically, and can’t be adjusted under COMS
setup.
Before setting memory voltage overclocking, please ensure that your DDR
supports up to 2.3V. (Consulting your DDR supplier)
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED_D1
LED_D2
LED_D1 and LED_D2:
These 2 LED indicate system power on diagnostics.
Please refer to the table below for different messages:
LED_D1 LED_D2 Message
ON ON Normal
ON OFF Memory
Error
OFF ON VGA Error
OFF OFF Abnormal: CPU / Chipset error.