Biostar TForce 965PT, Руководство по установке

Страница: 3 / 110

TForce P965 Deluxe/TForce 965PT
1
CHAPTER 1: INTRODUCTION
1.1 B
EFORE
Y
OU
S
TART
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
Prepare a dry and stable working environment with
sufficient lighting.
„
Always disconnect the computer from power outlet
before operation.
„
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
„
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
„
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
„
Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 P
ACKAGE
C
HECKLIST
(TF
ORCE
P965 D
ELUXE
)
FDD Cable X 1
HDD Round Cable X 1
Serial ATA Cable X 4
Serial ATA Power Cable X 4
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
S/PDIF out Cable X 1
USB 2.0 Cable X1 (optional)
1.3 P
ACKAGE
C
HECKLIST
(TF
ORCE
965PT)
FDD Cable X 1
HDD Cable X 1
Serial ATA Cable X 1
Serial ATA Power Cable X 1
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)