Chapter 2: Hardware Installation
| 17
TB360-BTC PRO / TB360-BTC+ / TB360-BTC Expert
Install Two Power Supply Rule:
You can install your two power supply by following steps:
1. The 24-pins ATX power connector of power supply1 is connected to ATXPWR1.
2. The
8-pins or 4-pins ATX power connector of power supply1 is connected to ATXPWR3.
3. The
24-pins ATX power connector of power supply2 is connected to ATXPWR2.
Note
»
Ensure proper pin connecting to your ATX power connector, wrong connection may damage your
motherboard.
AUXPWR1/ AUXPWR2: PCIe Power Source Connector
The connector pr12V to the PCIe power circuit.
Pin Assignment
1
+12V_Output
2
+12V_Output
3
+12V_Output
4
Ground
5
Ground
6
Ground
