background image

TA970 

17 

CHAPTER 4: UEFI BIOS & SOFTWARE 

4.1  UEFI BIOS Setup 

„

 

For better system performance, the UEFI BIOS firmware is being 
continuously updated. The UEFI BIOS information described below in this 
manual is for your reference only and the actual UEFI BIOS information and 
settings on board may be different from this manual 

„

 

For further information of setting up the UEFI BIOS, please refer to the UEFI 
BIOS Manual in the Setup DVD. 

4.2 BIOS 

Update 

There are three ways to update the BIOS: 
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher. 

1. BIOS Update Utility 

1. Installing BIOS Update Utility from the DVD Driver.   

2. 

Download the proper BIOS from 

www.biostar.com.tw

 .

   

3. Open BIOS Update Utility and 
click the 

Update BIOS

 button on 

the main screen. 

 

 

4. A warning message will show 
up to request your agreement to 
start the BIOS update. Click 

OK

 to 

start the update procedure.

 

 

5. Choose the location for your 
BIOS file in the system. Please 
select the proper BIOS file, and 
then click on 

Open

. It will take 

several minutes, please be 
patient.  

 

Содержание TA970




















































Отзывы: