Biostar Racing X370GT7, Руководство пользователя

Страница: 11 / 78

Chapter 2: Hardware installation | 11
X370GT7
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot
such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips snap back in
place and the DIMM is properly seated.
Note
»
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Memory Capacity
DIMM Socket Location DDR4 Module Total Memory Size
DIMMA1 8GB/16GB
Max is 64GB.
DIMMA2 8GB/16GB
DIMMB1 8GB/16GB
DIMMB2 8GB/16GB
Memory Installation
Single Channel Status DIMMA1 DIMMA2 DIMMB1 DIMMB2
Enabled (only for Bristol) O X X X
Enabled X O X X
Enabled (only for Bristol) X X O X
Enabled X X X O
Please refer to the following requirements to activate Single Channel or Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DIMMA1 DIMMA2 DIMMB1 DIMMB2
Enabled (only for Bristol) O X O X
Enabled X O X O
Enabled O O O O
(O means memory installed, X means memory not installed.)
Note
»
When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.