P4M890-M7 SE
38
DRAM Clock
This item determines DRAM clock.
The Choices:
B y SPD
(default),
100MHz, 133MHz,
166MHz, 200MHz,
266MHz, 333MHz .
DRAM Timing
This item determines DRAM clock/ timing.
The Choices: Auto by SPD
(default), Manual, Turbo, Ultra.
SDRAM CAS Latency
When DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing.
The Choices: 2.5 /4
(default).
Bank Interleave
This item allows you to enable or disable the bank interleave feature.
The Choices: Disabled
(default).
Precharge to Active (tRP)
This item allows you to specify the delay from precharge command to activate
command.
The Choices:
4T
(default).
Activ e to Precharge (tRAS)
This item allows you to specify the minimum row active time (tRAS).
The Choices:
07T
(default).
Activ e to CMD (tRCD)
Use this item to specify the delay from the activation of a bank to the time that
a read or write command is accepted.
The Choices:
4T
(default).
REF to ACT/REF to REF (Trfc)
This item allows you to determine the selection for REF to ACT/REF to REF
(tRFC).
The Choices: 20T/21T
(default).
