NF61V Micro AM2 SE / NF61S Micro AM2 SE
BIOS Setup
22
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ7
(default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP.
The Choices:
SPP
(default)
Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3
(default), 1.
Onboard GPU
This item allows you to control the Onboard GPU.
The Choices: Auto
(default), Always Enable.
Init Display First
With systems that have multiple video cards, this item determines whether the
primary display uses a PCI Slot or an AGP Slot.
The Choices: PCI-Express
(default),PCI Slot, Onboard.
OnChip USB
This option should be enabled if your system has a USB installed on the system
board. You may need to disable this feature i f you add a higher performance
controller.
The Choices: V1.1+V2.0
(default), Disabled, V1.1
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sectors read / write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block mode (most new drives do), select Enabled for automatic detection of the
optimal number of block read / write per sector where the drive can support.
The Choices: Enabled
(default), Disabled.
All manuals and user guides at all-guides.com
