M7VIZ-SATA
8
North Bridge Fan Power Header: JNBFAN1 (optional)
Pin Assignment
1 Ground
2 +12V
3
FAN RPM rate sense
Note:
The JCFAN1, JSFAN1and JNBFAN1 support system cooling fan with
Smart Fan Control utility. It supports 3 pin head connector. When
connecting with wires onto connectors, please note that the red wire is the
positive and should be connected to pin#2, and the black wire is Ground
and should be connected to GND.
2.3 M
EMORY
M
ODULES
I
NSTALLATION
2.2.1
DDR Module installation
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the break
on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
