M7VIW-D BIOS Setup
23
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
The Choices: Stop Grant, PwrOn Suspend.
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3
(default),4 / 5 / 7 / 9 / 10 / 11 / NA.
Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card when system
wakes up from S3 state . The system time is shortened if you disable the function , but
system will need AGP driver to initialize the card . So , if the AGP driver of the VGA card
does not support the initialization feature , the display may work abnormally or not function
after S3 .
The Choices:
Auto,
Yes
(default), No.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The Choices:
Delay 4 Sec,
Instant-Off
(default).
IRQ/Event Activity Detect
If you highlight the literal “Press Enter” next to the “
IRQ/Event Activity Detect
” label
and then press the enter key, it will take you a submenu with the following options:
USB Resume from S3
This item allows you to enable or disable USB Resume from S3.
The Choices: Disabled
(defautl), Enabled.
VGA
When set to
On
, any event occurring at a VGA Port will awaken a system which
has been powered down.
The Choices: Off
(default), On.
LPT & COM
When this option is set to
On
, any event occurring at a COM(serial)/LPT (printer)
port will awaken a system which has been powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to
On
, any event occurring on a hard drive or a floppy
drive will awaken a system which has been powered down.
The Choices: On
(default), Off.
Содержание M7VIW-D
Страница 32: ...M7VIW D BIOS Setup 31...