47
Vcore Ripple Test(Open up the DOS Editor)
CPU Athlon_ M\B
SUA
6.0
CH 1
Vcore
CH 2
STPCLK
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type Enter & Enter & “Y” to go to the “menu”
3.At the next menu , select “Power Management Utilities4
4.At this menu , select “Throttle Ratio” and set at the rang of 50.0%~56.0%
and set “Enable” of “ ON”
5.Press <ESC> tiwce and then “Y” to exit the stpclk.bat program.
6.Type “EDIT” to enter the “EDIT” pragram. Press “Alt+F” to open up a
Pop-up menu.
7.Measure the Vcore waveform
Vcore Transient waveform
RESULT PASS
