Motherboard Manual
46
7. A dialog pops out after BIOS flash
is completed, asking you to restart
the system. Press the [Y] key to
restart system.
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the
Save & Exit
, using the
Restore
Defaults
function to load Optimized Defaults, and select
Save Changes and Reset
to restart the computer. Then, the BIOS Update is completed.
All the information and content above about software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
