TH67M U3/H67M U3/H67M H
UEFI BIOS M anual
15
Super IO Configuration
BIOS SETUP UTILITY
Super IO Configuration
> Serial Port 1 Configuration
> Parallel Port Configuration
> CIR Controller Configuration
Super IO Chip
Restore AC Power Loss [Power Off]
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Advanced
Specify what state to go to
when power is re-applied
after a power failure.
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Enter
+/-
F1
F3
F4
ESC
Restore AC Power Loss
T his setting specifies how your system should behave after a power fail or interrupts
occurs. Power Off: Leaving the system in power-o ff status aft er power recovers.
Power ON: Powering on the system immediately when power returns. Last State: 1.
Leaving the system in power-off i f the system shuts down at DC off status; 2.
Powering on the system immediately if the system shuts down at DC on status.
Options: Power O ff (Default) / Power On / Last State
Serial Port 1 Configuration
BIOS SETUP UTILITY
Serial Port 1 Configuration
Change Settings [Auto]
Serial Port [Enabled]
Device Settings
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Advanced
Enable or Disable Serial Port
(COM)
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Enter
+/-
F1
F3
F4
ESC
