background image

24 | Chapter 3: BIOS Setup

Adjacent Cache Line Prefetch

The processor has a hardware adjacent cache line prefetch mechanism that automatically 

fetches an extra 64-byte cache line whenever the processor requests for a 64-byte cache 

line. This reduces cache latency by making the next cache line immediately available if the 

processor requires it as well.

Options: Enabled (Default) / Disabled
Package C state demotion

This item enables or disables C state demotion.

Options: Disabled (Default) / Enabled
C1 state auto undemotion

This item enables or disables Un-demotion from Demoted C1.

Options: Enabled (Default) / Disabled
C3 state auto undemotion

This item enables or disables Un-demotion from Demoted C3.

Options: Enabled (Default) / Disabled
Package C state undemotion

This item enables or disables package C state undemotion.

Options: Disabled (Default) / Enabled
C state Pre-Wake

This item enables or disables C state Pre-Wake feature.

Options: Enabled (Default) / Disabled
LakeTiny Feature

This item enables or disables LakeTiny for C state configuration.

Options: Enabled (Default) / Disabled

SATA Configuration

SATA Controller(s)

This item enables/disables Serial ATA Device.

Options: Enabled (Default) / Disabled
SATA Mode Selection

This item determines how SATA controller(s) operate.

Options: AHCI (Default) / IDE

Содержание EIH81-IHP












































Отзывы: