Mini-ITX Mainboard Manual
22
!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described in this
manual is for your reference only. The actual BIOS information
and settings on board may be slightly different from this manual.
CHAPTER 3: BIOS SETUP
3.1 E
NTERING
S
ETUP
Power on the system and press <Delete> during the beginning of the boot
sequence to enter the BIOS setup menu. If you missed the BIOS setup entry
point, you may restart the system and try again.
3.2 U
SING
S
ETUP
Use the arrow keys to highlight items in most of the place, press <Enter> to
select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for
help and press <Esc> to quit. The following table provides more detail about
how to navigate in the Setup program by using the keyboard.
Keystroke Function
Up arrow
Move to previous item
Down arrow
Move to next item
Left arrow
Move to the item on the left (menu bar)
Right arrow
Move to the item on the right (menu bar)
Move Enter
Move to the item you desired
PgUp key
Increase the numeric value or make changes
PgDn key
Decrease the numeric value or make changes
+ Key
Increase the numeric value or make changes
- Key
Decrease the numeric value or make changes
Esc key
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
F1 key
General help on Setup navigation keys
F5 key
Load previous values from CMOS
F7 key
Load the optimized defaults
F10 key
Save all the CMOS changes and exit
