Chapter 2: Hardware installation
| 25
BIH11-IHP User’s Manual
ACPI Sleep State
This item allows you to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
Options: S3 (Suspend to RAM) (Default) / Suspend Disabled
Lock Legacy Resources
The item enables or disables Lock of Legacy Resources.
Options: Disabled (Default) / Enabled
Restore AC Power Loss
The item specify what state to go to when power is re-applied after a power failure.
Options: Power Off (Default) / Power On / Last State
Eup control
The item allows you to configure the Erp control.
Options: Disabled (Default) / Enabled
PME Wake up from S5
The item enables the system to wake from S5 using PME event.
Options: Disabled (Default) / Enabled
Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event. When this item is enabled,
the system will wake on the hr::min::sec specified.
Options: Disabled (Default) / Enabled
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up time, input hour, minute and second to specify.
USB Device Wakeup from S3/S4
This item enables or disables the USB Device Wakeup from S3/S4.
Options: Disabled (Default) / Enabled
Super IO Configuration
