Operation Manual BioSmart
BioSmart PalmJet, BioSmart PalmJet BOX,
BioSmart PalmJet BOX-T
v.049.1|03.2021|en
Page 13 of 39
Figure 4
–
BioSmart PalmJet reader installation scheme
Installation of BioSmart PalmJet BOX reader (BioSmart PalmJet BOX-T)
The BioSmart PalmJet hardware kit includes the following items:
Self-Threaded Screw 3.5 x 38 - 4 pcs.
Butt Dowel 6 x 35 - 4 pcs.
Readers are supplied with a mounting plate for vertical or horizontal surfaces, depending on the
operation way.
Figure 5 shows a diagram of installing the BioSmart PalmJet BOX reader (BioSmart PalmJet BOX-T)
on a vertical surface.
Figure 6 shows a diagram of the BioSmart PalmJet BOX (BioSmart PalmJet BOX-T) reader installation
on a horizontal surface.
BioSmart PalmJet BOX (BioSmart PalmJet BOX-T) reader installation procedure:
1.
Mark the places of the reader mounting plate attachment
(1)
.
2.
Lead the cables to the place where the reader is installed.
3.
Secure the mounting plate
(1)
with dowels and self-threaded screws
(2)
.
4.
Attach the reader casw
(3)
to the mounting plate
(1)
. To do this, insert the two upper
projections of the mounting plate into the corresponding mountings in the reader case.
5.
Fix the reader case to the mounting plate with the screw
(4)
.
