Page 13
©2015 BioSmart Technologies
Detailed Operating Instructions
Turning Power On
1. Press the POWER button on the left side of the Control Panel. The heater’s
ceramic heating elements will turn on inside the heater.
2.
After a few minutes, once the air within the heater is warm, the heater fan
will begin to operate.
Select your Operating Preference
The air purification can be set to run independently of the heating.
1.
Press Enter once to select heating only.
2.
Press Enter again for heat plus air purification.
3. Press Enter again for air purification only (can be used year around).
Pressing Enter again resets the cycle to heating only.
Setting the Temperature
This feature allows you to set the temperature that your heater will maintain.
1.
Press the temperature (TEMP) button on the Control Panel; the SET TEMP
indicator will illuminate and the temperature display will flash.
2.
Use the UP and DOWN buttons to select the temperature, press ENTER.
3.
The SET TEMP light will turn off, and the temperature is now set.
Switching Between Fahrenheit & Celsius
Press the DOWN & ENTER buttons simultaneously and hold for about 3
seconds. The display will update automatically.
