10
8.3
UV-lamp replacement
. Replacement must be performed only by qualified and spe-
cially trained personnel. UV lamp replacement is necessary after lamp stops func-
tioning or at the end of manufacturer specified lifetime. Use the indicator in the centre
of recirculator (fig. 4/2 or 5/8) to check UV lamps inside the recirculator. If the indicator
is alight while the switch is ON, then the UV lamps are functioning. If it is not, replace
the lamp, single lamp in case of
UVR-M
, both - in case of
UVR-Mi
.
Caution!
Do not switch on the unit with the cover removed or without filters! UV
lamp must be covered at all times during operation. Otherwise, UV lamp
can expose the operator and other people to dangerous levels of UV light.
8.4
Fuse replacement
. Disconnect the unit from the mains and unscrew the fuse holder
cap (fig. 4/3 or 5/10). Check the fuse and replace, if necessary, with a correct one:
Model, version
Voltage
Fuse
UVR-M
: V.4AA, V.4AB, V.4A3
220 V
M 1 A
UVR-M
: V.4AC
120 V
M 1.6 A
UVR-Mi
: V.3AA, V.3AB, V.3A3
220 V
M 2 A
Fuse type M
– time delay Medium.
8.5
Decommissioning of the unit.
The user is responsible for the decontamination of
the unit before decommissioning. Dispose of the appliance as electronic equipment
in accordance with the relevant national laws.
9.
Storage and transportation
9.1
Store and transport the unit at ambient temperatures between -
20°C and +60°C and
maximum relative humidity of 80%.
9.2
After transportation or storage and before connecting it to the electric circuit, keep the
unit under room temperature for 2-3 hrs.
9.3
For extended storage, the unit does not require special procedures.
10. Warranty
10.1 The Manufacturer guarantees the compliance of the unit with the requirements of
Specifications, provided the Customer follows the operation, storage and transporta-
tion instructions.
10.2 The warranted service life of the unit from the date of its delivery to the Customer is
24 months. For extended warranty, see
10.5
.
10.3 Warranty covers only the units transported in the original package.
10.4 If any manufacturing defects are discovered by the Customer, an unsatisfactory
equipment report shall be compiled, certified and sent to the local distributor address.
To obtain the claim form, visit
Technical support
page on our website at link below.
Содержание UVR-M
Страница 1: ......
