8
Edition 1.-4.03
Figure 3. FTA-2i front view
Figure 4. FTA-2i lid with sensor and tubing
Figure 5. MA-U, universal adapter
Figure 6. FTA-2i filter setup
Figure 7. FTA-2i rear panel
4.3
FTA-1 setup
.
-
Place the unit on horizontal even working surface.
-
Install the trapping flask (fig. 1/5) on the unit.
-
Assemble the lid, aspiration tubing and filter set (fig. 1/2). Attach aspiration tip (fig.
1/6) to the tubing.
Caution!
Position the filter with the
IN
marking pointing towards the unit (fig. 1/2).
-
Screw on the lid with the filter set and aspiration tubing to trap flask. Ensure that the
filter set is tightly inserted.
-
Connect the filter tubing to the pump (fig. 1/1) located at the top of the base behind
the trap flask, by turning the fitting clockwise.
-
Place the microtubes for aspiration tip into the holder (fig. 1/4).
-
Connect the external power supply unit into the socket at the rear side of the unit
and position the unit for an easy access to the external power supply and the power
switch.
Содержание FTA-1
Страница 1: ......
Страница 13: ...Edition 1 4 03 13 1 2 3 4 5 6 7 8 9 10 Figure 8 Optional accessories and replacement parts...
