background image

2

Introduction

Thank you for purchasing the BIOS Living Wireless Body Fat Analyzer Scale. 
This precision devise was developed with state-of-the-art technology and has 
a capacity of 396 lbs/180 kg. This scale measures body fat by using one 
of the most reliable methods of analyzing body composition – Bioelectrical 
Impedance Analysis (BIA). It measures body fat and hydration percentage 
by analyzing biological impedance and other body parameters, through a 
mild electronic current that runs through the body. 

Battery Installation

The floor scale and remote unit both use 4 x AAA batteries (included). 
Before using the scale open the battery covers located on the back of both 
devices and insert batteries. Ensure they are positioned with the correct 
polarity.

NOTE:

 After inserting the batteries the remote unit will 

display all data. After 2-3 seconds it will display the time, 
temperature and humidity.

 

Important Information

The floor scale requires bare feet for proper conductivity when measuring body 
fat. Place the scale on a hard, flat surface for best results. If the scale is placed 
on a soft surface, such as carpet or an uneven floor, results may be inaccurate.

NOTE: 

To get a more accurate average we recommend using the floor scale 

and remote unit together.

General Information

By using a unique infrared connection it is possible to place the scale on the 
floor while either holding the remote unit in your hands or by attaching it to 
the wall at eye level in front of you.
When using the infrared function, it is important that the floor scale and 
the remote unit are in line with each other, no further apart than 6.5 ft. / 2 
meters with no obstructions between the units.

Instructions for Measurement

This model can be used four different ways:

Содержание SC406









Отзывы: