6
2. Holding the plastic seat turn it over, there are 2 buckles and 2 frame grooves on each side of the seat. Make sure
that the 2 buckles are open. There are also 2 gray holders on either side of the commode cut out, these are to hold
the commode pail.
(Fig 4-5.)
Fig 4.
Fig 5.
3. Remove the commode cut out from the plastic seat and remove the lid from the commode pail. Slide the pail
through the gray holders.
4. Turning the plastic seat around, place the seat on the bottom bars of the frame.
5. Press down on the seat until you here a “CLICK”. Make sure the seat is level.
6. To lock the buckles around the frame, reach underneath the seat, close the buckles around the frame.
56120_IB_TH5862_BL_V2.indd 6
2018-12-17 4:02 PM
