Page 11 of 21
Figure 8: Biorep Thermoprobe
5
Perfusion Machine Set-up
5.1
Tubing Set-up
Figure 9: Tubing Set Installation
Tubing Set-up Directions (also see photograph on the following page):
1) Place the heating coil inside the automatic heater. Make sure there is good contact
between the stainless steel coil and the aluminum arms. Also, make sure there is good
contact between the coil and the spring loaded thermocouple. See Heater Set-up (5.2).
2) Connect tube “C” to the
Enzyme port
on the perfusion tray.
C
B
A
Transducer
Protector B
Transducer
Protector A
Heating Coil
Luer
Connectors
(To Organ)
D
E
F
