Bionics TX-2300KFP, Руководство по установке и эксплуатации

Страница: 25 / 40

TX-KFP
Bionics Instrument
© 2004 Eur 20040426, all rights reserved
- 25 -
Power on/off
3. Installation
3.5 Start-up
After the electrical connections have been made, the system can be powered on. Be aware that
there may be an increase in the output signal directly after powering on the system.
To avoid unwanted alarm outputs, ensure that in case an alarm/control unit is connected this
unit is set to stand-by mode prior to start-up.
When the unit is properly connected, the green led in the cover plate (see fig. 3.5.1) should be
on.
In case you encounter any problem during the start-up procedure please contact one of the
Bionics Instrument offices
1 )
1)
For Bionics Instrument Offices see Appendix 4
Fig. 3.5.1