Troubleshooting
EPT Icon Flashes Yellow
EPT Battery Charge Level is Low
EPT Icon Glows Red and “E” appears in Digital
Display
EPT Malfunction
EPT Icon Flashes Red and “E” appears in
Digital Display
EPT Temperature Error
EPT Icon Flashes Red and Intensity Level
Flashes in Digital Display
Faulty Electrode Contact
RF Icon Flashes Red
Radio Communication Failure or
EPT Battery Failure
RF Icon Glows Red and “E” appears in Digital
Display
Registration Failure
Patient Programmer Icon Flashes Yellow
Patient Programmer Battery
Charge Level is Low
Patient Programmer Icon Glows Red and “E”
appears in Digital Display
Patient Programmer Malfunction
or Charging Error (while charging)
1. Turn stimulation off. Grasp the tab on the StimRouter Electrode and gently pull the electrode away
from the skin. Note: Do not grasp the gel pads on the back of the electrode.
2. Attach the StimRouter electrode liner to the gel pads.
3. Store the StimRouter electrode and EPT in the StimRouter Electrode Carrying Case.
4. Remove the EPT from the StimRouter Electrode when the gel pads appear worn, can no longer
adhere to the skin, or after a maximum of four days of use.
5. Make sure the StimRouter Electrode liner is on. Hold the EPT and gently pull the StimRouter
Electrode away from the EPT to unsnap it.
StimRouter Electrode and EPT Removal
1
2
3
5
©2017
602-00632-001 Rev. C
11/2017
See User's
Guide
Rx Only
Bioness Inc.
25103
Rye Canyon Loop
Valencia, CA
91355
USA
Telephone: 800.
211.9136
or
661.362.4850
Website: www.bioness.com