Bionaire TwinHeat BCH3210, Инструкция, Страница: 4 / 10

HEATER SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void the
warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed by
qualified personnel only.
2. If you need to exchange the unit, please return it in its
original carton, with a sales receipt, to the store where
you purchased it. If you are returning the unit more than
30 days after the date of purchase, please see the
enclosed warranty.
3. Should your heater require service, please call
1-800-253-2764
in North America for further assistance.
4.
✉
If you have any other questions or comments,
feel free to write to us:
PO Box 400
Milford, MA 01757
USA
Canada
6385 Shawson Drive
Mississaugua, Ontario
Canada, L5T IS7
Visit our website at www.bionaire.com
arrange the extension cord where it cannot be pulled on by
children or accidentally tripped over.
AUTO SHUT-OFF
To prevent damage and risks due to overheating this unit is
equipped with a built-in overheat protection device. It cuts
off the power as soon as the heater’s internal temperature
becomes too high. This patented, technologically
advanced system requires the user to reset the heater in
case of a potential overheat situation. It will only resume
operation when the user resets it.
To Reset the Heater:
1. Unplug the heater and wait 10 minutes for the
unit to cool down.
2. After the 10 minutes, plug the unit in and
operate normally.
PRE-OPERATING INSTRUCTIONS
Carefully unpack your heater from the box (it is
recommended to save the box for off-season storage).
OPERATING INSTRUCTIONS
1. Place the unit on a firm level surface. Plug in the heater
to a 120V power source.
2. To start the unit, press the Power button (BCH3220) or
turn the mode knob (BCH3210) located on the control
panel. The power light will remain lit while the heater
is in operation. For BCH3210, make sure that the mode
knob is in the OFF position.
THERMOSTAT INSTRUCTIONS
On the first use, the heater will operate in fan mode.
After initial use, the heater will operate on the last
programmed setting.
This function allows you to set the heater to your
desired comfort level. The heater will maintain your
desired room temperature.
6 3