B
R O A D C A S T
Page 45
© 1999 Biometric Identification, Inc.
Broadcast
The Broadcast window allows you to modify settings on all units in a networked
environment at the same time. Under most circumstances, you will use this
window when communicating over the Host Port (recall that the Aux Port primarily
is for communicating with a single unit). You will note that the window is similar to
the Veriprox Parameters window.
Figure 22: Broadcast Parameters Window
Note:
As with the Veriprox Parameter Settings window, change one
setting at a time and click the Broadcast button after each change.
For example: if you wish to change the Security Threshold and the
Wiegand Out string: 1) change the threshold; 2) click the
Broadcast button in the security section; 3) change the string; and,
4) click the Broadcast button in that section.
Warning:
This will delete
ALL templates!
Enter the ID#,
then either:
1 enter the
Index#, or
2 check the
Delete
all…
box
The PC baud rate
will update
automatically.
