Biomet 3i Navigator Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 32

Biomet 3i Navigator Скачать руководство пользователя страница 8

5

The

Navigator

®

System For Guided

Surgery was developed in response to clinicians’ growing
interest in dental implant placement utilizing the benefits of
Computed Tomography (CT) and the desire to accelerate
patient provisionalization.

The Navigator System is open architecture. The system is
used in conjunction with the leading planning software and
case-specific surgical guides to enhance treatment planning
and improve the accuracy of placing BIOMET

3i

Implants.

CT guidance technology allows clinicians to determine
more precisely the locations of anatomical structures and
the dimensions of underlying bone as well as to ascertain
bone densities in order to plan and perform cases. Use
of CT scans allows procedures to be less invasive than
traditional surgery. The necessary planning and added
instrument precision can shorten chair time for full-arch,
single-tooth and short-span implant cases, allowing for
more efficient procedures.

The Navigator System can be used to fabricate a
provisional prosthesis prior to implant placement by
creating a master cast using the surgical guide.

The system allows clinicians to place dental implants in
predetermined locations with proper hex orientation. This
feature is especially beneficial for single tooth and cement
retained provisionals. It offers clinicians the option to
deliver a provisional prosthesis the day of surgery and the
opportunity to perform bone, teeth and tissue supported
(flapless) surgery.

The BIOMET

3i

Parallel Walled Navigator System For

Guided Surgery includes the Parallel Walled Navigator
Surgical Kit and the Parallel Walled Navigator Laboratory
Kit. These kits make it possible for clinicians to restore and
place Certain

®

Parallel Walled 3.25, 4 & 5mm Implants,

OSSEOTITE XP

®

4/5mm Implants, PREVAIL

®

3/4/3,

4/5/4 and straight PREVAIL 4/3 and 5/4mm Implants. With
this design, BIOMET

3i

is able to support the majority of

clinical situations and compliment the use of a wide range
of prosthetic options.

A 2mm Fixation System (31-3100) is available through
BIOMET Microfixation. To order this Fixation System,
please contact BIOMET Microfixation at 1-800-874-7711.

Instrumentation Overview

«
...
6
7
8
9
10
...
»

Содержание Navigator

































Отзывы:

Нет отзывов