Biomega BOS Скачать руководство пользователя страница 14

CRANK SET

Check the belt sprocket every 6 months. If there are any teeth missing, the belt sprocket should be replaced by a bicycle mechanic. 

BOTTOM BRACKET

The bottom bracket should be checked by a bicycle mechanic every year. Riding in wet conditions requires maintenance of the bike every 6 months.

PEDALS

Your pedals should be checked every 6 months. If the screw thread is worn, the pedal should be replaced.

BOLTS, NUTS AND SCREWS

All bolts, nuts and screws should be sprayed with anti-rust spray. When you have purchased the bicycle spray all bolts, nuts and screws, and repeat 

this process every six months. Avoid spraying any lubricant on the disc or the caliper, since this could damage the brakes.

WARRANTY

Limited two-year warranty of complete bicycle

Subject to the following limitations, terms and conditions, Biomega war- rants to the original owner of each new Biomega bike that this bike is free of 

defective materials and workmanship for a period of 2 (two) years from the date of the original purchase from an authorized Biomega dealer.

This warranty does not apply to gear hubs, brakes and shifters which are covered directly with these manufacturers.

The above limited warranty is conditional upon the bicycle being properly maintained and operated under normal conditions and use.

Failure due to accidents, abuse, neglect, normal wear & tear, improper assembly, improper maintenance by any other than authorized bicycle mechanics 

or use of parts inconsistent with the use originally intended for the bicycle as sold are not covered by this warranty.

In case of warranty claim contact the original place of purchase, accom- panied by an original bill of sale or proof of purchase that identifies the bike or 

the frame by the serial number. The original owner is responsible for any and all labour and transportation charges associated with the warranty repair 

or replacement of all parts.

26

25

Содержание BOS
















Отзывы: