GETTING STARTED
GPR+ comes supplied with six AAA rechargeable NiMH
batteries which must be fully charged prior to use, as
diagram below (step 1 through 3).
If preferred, six standard AAA alkaline batteries can also
be used and should not be charged (follow only step 1).
Step 1 – Remove retention screw located on bottom
back of GPR+.
Place batteries according to polarity
indicators.
Replace lid and screw.
WARNING! BATTERIES MUST BE INSTALLED AS
PICTURED TO AVOID EXCESSIVE HEAT OR POTENTIAL
FOR PERMANENT DAMAGE TO THE READER WHILE
CHARGING
Step 2 – Remove USB plug and attach cable to GPR+.
