Electrode pad replacement
Over period of time, the pad may become less sticky, to order the
optional accessory part on from dealer for replacement
1. To pull off 2 clip buckles between device and electrode pad (FIG, 3)
2. Align the arrow symbol'' '' on the pad to the'' '' on the bottom
of unit and buckles up by pressing on the back of pad (FIG,4)
Operation
1. Press and Hold ''
'' button until all number segments turn on for a
moment, then one of the mode icon ''THER'' , ''SHARP'', ''SINGLE''
start blinking
2. Press ''
'' or ''
'' button to select the mode you desired
3. Press ''Mode'' button to enter timer setting
4. Press ''
'' or ''
'' , timer will roll up or down among 5-10-15-20-
25-30 minutes, to select a timer you want
5. Press ''Mode'' button to confirm the timer and start operation
6. Press ''
'' button to increase intensity level to a proper level you
feel comfortable, or press ''
'' button to decrease the level, (There
are total 8 intensity levels every 2 levels increment will add up one
segment of level indication)
7. Press ''mode'' button to exit anytime during the massage period
and you can re-setting massage mode again
8: Press and Hold ''
'' button to turn off the device or unit auto off in
thirty second after the times up of set timer
Note:
when battery icon shown, the device will stop operation and
only blinking battery icon , please refer to battery replacement
and replace with a new lithium battery type CR-2032
Maintenance
*
There is a PVC plate (included) for you to restore the device for
future re-use be sure to stick the unit on the shining side of plate
*
Do not disassemble, repair, or remodel the main unit
*
The device will not be used for a long period , please take out battery
*
Keep the device out of the reach of children
*
Avoid placing the device where directly sunlight, high humidity or
high temperature
*
Do not drop device and avoid suddenly shock
*
Do not use thinner or any chemcials solvent to clear the device,
but use a damp cloth to wipe up
*
Please make sure to keep your skin dry and clean before stick
device on skin surface
*
For some sensitive skin, it may appear ruddy skin on the apply
position , this is normal and will disappear within about an hour
3
4
Pull Off
Fig.3
Fig.4
Align The
Arrow Symbol
Optional Accessory Part No
Buckles
