Manual - BioSpot BT600 workstation
page 2 of 15
1.
Safety Instructions
Read the safety instructions first, before operating the system!
We will take no liability in case of material or person damage, due to incorrect use or inobservance of
the manual respectively the safety instructions. In this case, every warranty claim expires.
•
Avoid operation in contrarious environmental conditions. This may lead to damage to the
electronics and to a possible hazard for the health of the user.
Contrarious environmental conditions are:
-
Too high humidity (greater than 80%, condensing)
-
Moistness
-
Too high environmental temperature (more than 45°C)
•
Only put the BioSpot BT 600 in operation if the device is located on a stable and flat base and
there are no visible damages like isolation damages on cables or damages on mechanical
parts.
•
If it is supposed, that it is not possible to launch a safe operation, you have to take it out of
service and protect it against an unintended operation. It is supposed, that an safe operation
is not possible if:
-
the BioSpot BT600 shows visible damages,
-
the BioSpot BT600 isn´t working and
-
after a longer storage in bad conditions or
-
after heavy load due to transport.
1.1
Electrical Safety
Warning!
High voltage hazard
Do not open the BioSpot BT600! The device contains circuits which carry power supply voltage.
Opening is only allowed to skilled personnel while the power plug is disconnected. Inadmissible
operations will nullify the warranty!
Service and maintenance of the BioSpot BT600 may only be executed by skilled personal!
Warning:
High voltage hazard after switching off the device!
CAUTION:
After switching off the device, a DC voltage of 180 V remains in the circuits for several
minutes due to a capacitance in the circuits!