Bioer ThermoQ, Инструкция по эксплуатации

Страница: 25 / 32

Instructions for ThermoQ Metal Bath
Chapter IV Connect Computer
—
19
—
4.5 Run
a. Run local file
If the instrument is running, after being connected with a computer, the instrument will continue to run.
Running file is a local program of the instrument.
b. Run computer file
After connecting the instrument, stop running local file. Open the file to be ran, click “run” , the
dialog box of “run file” will pop up. Choose the instrument to be ran, click “OK” to run the program.
Meanwhile, the instrument will save the new file into local program.
After running file, the right side of main menu will display the overall progress of running.
The running status of the instrument is shown in the picture as below. Click “stop” , end the
running of file; click “skip the section” , finish the current section and run the section.