biodex 950-214, Руководство по установке и эксплуатации

Страница: 15 / 48

The BioStep and BioStep Clinical Pro features five pre-programmed exercise protocols. These
can be used in conjunction with over 30 resistance levels for Constant Resistance Control or 20
speed settings for Isokinetic Speed Control applications (Clinical Pro only).
Each pre-programmed exercise protocol can be used as is, or can be customized by changing the
weight, time, speed or resistance level values. Modifying the <Set Time> value changes the total
time and the duration of each interval. Changing the Set Speed or Resistance Level increases or
decreases each interval. The minimum time for each profile is six minutes.
During the exercise, actual patient Resistance in WATTs is displayed on the Resistance Level Bar
Graph. The selected program resistance level or speed is displayed in the Exercise Window.
The Resistance Level Bar Graph provides both clinician and user with immediate, real-time
biofeedback, which helps make it easy for the user to stay within personal protocol guidelines
and for the clinician to be aware of the user’s level of resistance.
NOTE: Resistance may be changed while exercising. If changed, the new resistance becomes the basis for
subsequent levels.
The following sections define each exercise protocol and its potential applications.
NOTE: For all profiles of less than 10 minutes duration, the warm-up is one minute and the cool down is two
minutes. For profiles greater than 10 minutes duration, the warm-up and cool down are two minutes each.
CONSTANT RESISTANCE PROFILE EXAMPLES
All segments of the Constant Profiles are based on the work rate entered for the peak resistance
level work rate when you set Adjust Resistance Level. For example, if you enter “5” as the Peak
Resistance Level, the Constant Resistance (Manual Mode) profile will remain at “5” for the dura-
tion of the exercise session.
Minimum time for all profiles = 6 minutes.
Examples
With a Peak Resistance Level of “5”, a Constant Resistance (Manual Mode) Profile will appear
like the following example:
Peak Resistance Level: 5
— 15 — SELECTING & CUSTOMIZING EXERCISE PROFILES
8. SELECTING AND CUSTOMIZING EXERCISE PROFILES
Begin at 5
End at 5